KARI Power Connector PKL 9-25

KARI
POWER CONNECTOR PKL 9-25

completely watertight
750 V ~, 8 x 25 A + grounding
simplifies maintenance

SIMPLIFIES MAINTENANCE
When taking the pump in for maintenance it is easy to disconnect the PKL 9-25. Just loosen the screw in the middle and the female and male connector can be separated. Then the caps should be mounted in their places to prevent any dirt or water entering the connector.

MOUNTING
Mounting of the PKL 9-25 is easy and fast. It is also possible to mount the PKL 9-25 afterwards to the pump cable. If the assebling is done carefully (all screws and nuts tightened properly) the connector is watertight.

SAVES TIME, MONEY AND WORRY
When the PKL 9-25 is used, there is no need for an electrician when the pump is disconnected, which saves costs. Also the gastight cable bushings in the pumping station remain in proper condition since there is no need to open them. The pump will always rotate in the right direction after reconnection, which saves worry and time.

PKL 9-25 TECHNICAL DATA

• Voltage	750 V AC
• Current	8 x 25 A
• Max. pump power in Y/D starting	22 kW
• Tightness	IP 67 watertight
• Temperature range	-40…+40 °C
• Length	450 mm (as connected together)
• Max. diameter	85 mm
• Weight	1,45 kg

TYPE MARKING
E.g. PKL 9-25-S2 means:

PKL	power connector for pumps
9	9 poles
25	each core rated 25 A
S2	bushing for pump cables OD 18 - 25 mm

Cable bushing sizes:
S0	9 - 16 mm
S1	12 - 18 mm
S2	18 - 25 mm
S3	22 - 32mm

CONNECTIONS OF THE POWER CONNECTOR PKL 9-25

Female socket

Shall be mounted to the cable which comes from the starter (power outlet). Plug viewed from inside, i.e. from direction of cable

Male plug

Shall be mounted to the cable which leads to the pump. Plug viewed from inside, i.e. from direction of cable.

POWER CONNECTOR PKL 9-25 SPARE PARTS LIST

Part no.	Description
1	connector body	male
2	connector body	female
3	plug body	male
4	connecting pins	1 + 8
5	socket body	female
6	connecting sockets	1 + 8
7	cover	male
8	cover	female
9	nut
10	0-ring
11	cable entrance bushing S0 ... S3, see "Type marking" above

Last updated 27.5.2009